News / exposure grade bricks

• Jul 02, 2015

  Elastomeric paints are a wise choice for efflorescence prevention

  Without damp or water penetration, efflorescence cannot occur. Efflorescence is caused by a concentration of salts that have been dissolved by moisture and transported by capillary action to a point of discharge where the moisture evaporates, and leaves the salts behind.  Water is the most destructive compound that works against the health and longevity of any building, in so many different ways other than just efflorescence. Therefore, a quality building specification must always pay careful attention to preventing the ingress of water and damp in every situation.  For over a decade, a cement rendered and painted finish has been very popular in Australia. Render has often been applied...

  Read more →
  • concrete, damp proof course, dpc, efflorescence in render, Elastomeric paints, exposure grade bricks, high build paints, how soon can you paint render, membrane, mortar, mortar additive, paint systems for masonry, painting over render, render, rendered walls, saline soils, salinity, salt attack, salt damp, salt resistant bricks, shrinkage cracks
  • Share

• Mar 05, 2014

  Salinity in Australia - a big problem that builders need to consider.

  The Master Builders Association meeting held in Maitland last week had a very entertaining and informative guest speaker from the NSW Department of Primary Industries. The topic was urban salinity. Salt from the soil can have a very destructive and catastrophic effect on masonry in buildings. Salt is drawn up into masonry with rising damp, and over many years with wet and dry cycles, more and more salt is deposited into the point of evaporation, typically in brickwork or stonework below damp proof course [DPC] level. The pressure exerted by crystallising salt can exceed 200MPa, whilst the tensile resistant strength...

  Read more →
  • Ben from Efflock, Brick Mart, brick mortar, brickwork, Brookvale, building advice, building in saline areas, building materials, building problems, building technology, camden council, chlorides, construction in saline soils, construction problems, damp proof course, efflock for saline areas, exposure grade bricks, ground salt, masonry, prevent salt attack, prevention of salt attack, rising damp, saline soils, salt attack, salt in sand, salts, sodium chloride, sodium sulfate, spalling, stop salt attack, urban salinity
  • Share