News / australian standards

• Sep 05, 2014

  How to remove efflorescence

  Efflorescence is very simply caused by the action of water entering masonry. That water then dissolves inherent salts, the most abundant of those salts is usually what's known as 'free lime' which is left surplus from the matrix of the concrete. Removing efflorescence is difficult and labour intensive, and requires acid based remover. Many products attempt to mask the word 'acid' with "water based" and other jargon, and will often mask any unpleasant odour with a nice scent such as lemon. Regardless,  an acid pH is essentially what's required to dissolve the efflorescence.  Once efflorescence is cleaned, it is most likely going to return....

  Read more →
  • acid, Add efflock to protect against efflorescence, australian standards, avoid efflorescence, bloom, calcium carbonate, calcium hydroxide, calox, chemical, clean efflorescence, cleaner, concrete, cost for efflock, eff lock, effavecence, effavescence, effavesence, effblock, effervescence, efflorescence, efflorescence can now be avoided, efflorescence cleaner, efflorescence control, Efflorescence from tile beds, efflorescence in balcony tile bed, efflorescence in brickwork, efflorescence inhibitor, Efflorescence is a defect, Efflorescence management, efflorescence prevention, efflorescence prevention for architects, Efflorescence protection, efflorescence protection for architects, efflorescence removal, efflorescence remover, efflorescence solution, efflorescence UK, Effstop, Effstop Plus, eflock, eflorescence in balcony tile bed, expert, get efflock, getefflock, how to remove efflorescence, inhibitor, lime, lime bloom, lime weeping, pH, prevent efflorescence, remove effavescence, remove efflorescence, remover, scrub efflorescence, seal grout, sealer, sealing tiles, solution, stop efflorescence, stop efflorescence with efflock, what causes efflorescnce, white deposits, white leaching, white marks on black grout, www.stopefflorescence.com
  • Share

• Apr 19, 2013

  Efflock testing: Boral Material Technical Services

       Photo showing Efflock testing samples in the first week of testing (very slight efflorescence is visible on the control samples without Efflock on the left). Efflock is currently undergoing independent testing at the Boral Laboratory in Baulkham Hills, Sydney. This test facility is the largest of it's type in the Southern Hemisphere and is well recognised. Efflorescence testing can take a little while to manifest, but I've just had word from the Senior Development Engineer, Tony Song, that they are beginning to observe more conclusive results, and Efflock does perform. As part of the testing, we have created...

  Read more →
  • absorption, approved testing, australian standards, australian standards testing, Boral testing, Boral testing for efflorescence, cement, control transport of damp through masonry, controlling efflorescence, efflock sample, efflock to prevent efflorescence, efflock to prevent rising damp, efflorescence, efflorescence control, efflorescence in balcony tile bed, efflorescence prevention, eflorescence in balcony tile bed, hydrophobic tile bed, prevent rising damp, prevent salt damp, prevent wicking, testing, testing authority, white deposits, white leaching, wicking, wicking effect
  • Share