News / recommended additive for saline areas

• Jan 20, 2014

  Rising Damp and Salt Attack - free PDF

  We have recommended this publication on our blog previously: Salt Attack and Rising Damp - A Guide to Salt Damp in Historic and Older Buildings. Salt attack is as destructive to masonry as termites are to timber, and is prone to occur on any building site in Australia due to our soils and extreme weather patterns. As salt is dissolved by water and absorbed by masonry, the water evaporates, leaving behind more and more salt with each wet cycle. Salt crystallises to expand at extraordinary pressure   (> 200MPa) to easily turn stone, bricks and mortar to dust. As outlined...

  Read more →
  • Brick Mart, brick mortar, brickwork, building in saline areas, building problems, Camden Council, cement additive, control transport of damp through masonry, CPD points for builders, Damp proof course, DPC, Dubbo council, efflock to prevent efflorescence, efflock to prevent rising damp, efflock to prevent rising damp in render, efflock to prevent salt damp, efflock to prevent water absorption, get efflock, getefflock, Green Star, green star approved, Green Star rating, recommended additive for saline areas, saline areas, salinity, salt attack, Salt Attack and Rising Damp, Salt Attack and Rising Damp - A Guide to Salt Damp in Historic Buildings, salt attack in brickwork, salt in soil, salts rising, sustainable architecture, why you should get efflock
  • Share